Xtreme XR1555 Operation And Safety Manual page 40

SYSTEM SETTINGS
Pressing the SYSTEM SETTINGS soft button will display engine
information. The top left button restores the factory defaults.
The up/down buttons are used to navigate this menu. Pressing
the MENU soft button will return to the previous menu.
Figure 33. System Settings
When making changes to the system settings, you will be
prompted to confirm or cancel the new entries.
Figure 34. Settings Confirmation Warning
SERVICE REMINDERS
Pressing the SERVICE REMINDERS soft button will display data
pertaining to maintenance schedules.
Figure 35. Service Reminders Menu
If a scheduled service is due, the service needed is displayed
below the tachometer in the hour meter box.
Operation Manual Operation Manual
Figure 36. Service Requested
TRANSMISSION CALIBRATION (EZCal)
After each transmission oil change the transmission needs
to be re-calibrated to accommodate for clutch wear. When
the EZCal button is pressed, the TCU (Transmission Control
Unit) enters transmission calibration mode and it checks
first for all the machine conditions necessary for a successful
transmission calibration. It displays a green check symbol to
the right of the condition if it is met.
Figure 37. Transmission Calibration - Machine Conditions Check
When all of the machine conditions for calibration are met,
the TCU enters clutch calibration mode.
Figure 38. Clutch Calibration
It calibrates the first clutch, and upon successful calibration it
moves to the second and so forth. The telehandler must be
OFF after calibration is complete.
40
Operator Cab