Table of Contents
Advertisement
Figure 76. Quick Attach Couplers For Hydraulic Systems.
(A) Female Coupler. (B) Male Coupler.
Quick Attach System
This telehandler includes a quick attach system that allows for
easy attachment changes. Perform attachment connection
and removal procedures on level ground.
Attachment Connection
Improper
attachment can result in death or serious
injury. Attachments not locked into place could
become unstable and fall on the operator or
other personnel near the telehandler, which
could result in death or serious injury.
•
Make sure attachment locking devices are always in
place.
•
DO NOT operate the telehandler until you have positive
indication that the carriage attachment is fully engaged.
Operation Manual
Operation Manual
Warning
connection
of
an
1.
Position the telehandler directly behind the attachment.
NOTE: Allow enough distance to extend the boom ap-
proximately 18 to 20 inches.
2.
Tilt the quick attach adapter forward.
3.
Extend the boom and/or drive the telehandler forward
until the pivot pins (A) are below and between the two (2)
attachment hooks (B).
Figure 77. Drive Telehandler Forward to Align Pivot Pins (A) with Attach-
ment Hooks (B)
4.
Raise the boom until pivot pins (A) have seated fully in
attachment hooks (B).
auxiliary
Figure 78. Raise Boom Until Pivot Pins (A) Are Fully Seated in Attachment
Hooks (B)
62
B
A
Operation
Advertisement
Table of Contents
