Kongsberg Simrad Robertson AP300X Series Instruction Manual page 53

NORTH
WEST
PORT
00
PLOT INSTR MOB
Waypoint Name
Waypoint Latitude
Waypoint Longitude
Flashing Cursor prompt
Change waypoint
name (if desired)
Adjust the Latitude value
Adjust the Longitude value
Other Editing Options:
To cancel editing and restore waypoint to previous name and position values before
the ENTER softkey is pressed: Press "ESC" softkey.
To delete the waypoint and store a blank waypoint back to memory:
Press "DEL" softkey.
22081814H
Editing Waypoints
Editing allows you to change the Name,
Latitude or Longitude value of a waypoint.
Waypoints may be edited (changed) or
deleted (erased).
EAST
STBD
N
W
INFO
NAV
COG :
SETUP
Select WP
Selected
Waypoint
Buoy32a
N
E
BRG:
DST:
ESC GOTO MAIN
Select WP
Selected
Waypoint
Buoy 32a
N 40°52.60'
E 72°30.15'
BRG:
DST: 0.00 Nm
DEL
ESC
GPS1 POSITION
40°52.60'
72°30.15'
075°M SOG : 5.00Kt
ROUTE MAIN WAYPT GOTO
MOB - WP
TEMP - WP
Buoy - 002
XXXX - 003
XXXX - 004
XXXX - 005
40°52.60'
XXXX - 006
72°30.15'
XXXX - 007
°M
XXXX - 008
Nm
XXXX - 009
ADD EDIT
Press the EDIT softkey after
pointer is set to the waypoint
that is to be edited.
MOB - WP
TEMP - WP
Buoy - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
000°M
XXXX - 009
MAIN ENTER
Press ENTER to save WP to memory
Autopilot Operation
Turn
Robertson
to change pointer
position to point at
waypoint to edit
Robertson
Use to scroll cursor
through characters
Use the or
cursor to character field.
Use to move cursor to
next line
to move
51