Kongsberg Simrad Robertson AP300X Series Instruction Manual page 112

Robertson AP300X Autopilot
If an AP300DLX is installed, provide the user with the following
additional instructions:
110
Go through the user SETUP menu and show how to (and why)
change the settings.
Also include Nav. source, Pos. source and Wind sensor selection if
applicable.
Show the owner where the compass (or compasses) is mounted
and instruct him to keep magnetic items away.
Show where the Mains circuit breaker is.
Setting the POS source in the USER SETUP menu
Setting the AP300DLX as the NAV source in the USER SETUP
menu.
Go through each of the primary screens in the AP300DLX:
How to input waypoints
• Manual input
• Saving present position
How to steer to waypoints
• Stored waypoints
• TEMP waypoint
• MOB waypoint
Navigating with waypoints in the AP300DLX and the pilot in NAV
mode
Building routes from previously saved waypoints
Navigating with routes in the AP300DLX and the pilot in NAV
mode
22081814H