Kongsberg Simrad Robertson AP300X Series Instruction Manual page 51

The accuracy of current navigation systems make it possible to
WARNING !
automatically navigate extremely close to positions that you will
input the AP300DLX. When entering waypoints from a nautical
chart or from a position listing, select a position that is a safe
distance away from the actual location, to insure that you will
not steer directly into e.g.a selected buoy.
If you do not press ENTER within 60 seconds after naming the
waypoint, the new waypoint will not be saved.
As you continue moving, the AP300DLX will continuously calculate
the distance and bearing from the ship's current location to the
waypoint position that was retained at the instant the ADD button was
pressed.
WEST
PORT
PLOT
Name the Waypoint
Adjust the Latitude value
Adjust the Longitude value
22081814H
NORTH
EAST
STBD
00
MOB NAV
INSTR INFO
Flashing Cursor prompt
Storing Waypoints
GPS1 POSITION
N 40°52.60'
W 72°30.15'
COG : 075°M SOG : 5.00Kt
SETUP ROUTE MAIN WAYPT GOTO
The next available waypoint is automatically
presented as the new waypoint.
Adding new WP
Move cursor
MOB - WP
< or >
TEMP - WP
Change value
XXXX - 002
XXXX - 003
XXXX - 004
XXXX - 005
N 40°52.60'
XXXX - 006
E 72°30.15'
XXXX - 007
BRG: 000°M
XXXX - 008
DST: 0.00 Nm
XXXX - 009
ESC DEL MAIN ENTER
Press ENTER to save WP to memory
Autopilot Operation
Select WP
MOB - WP
TEMP - WP
Selected
Buoy - 002
Waypoint
XXXX - 003
XXXX - 004
Buoy32a
XXXX - 005
N 40°52.60'
XXXX - 006
E 72°30.15'
XXXX - 007
BRG: 076°M
XXXX - 008
DST: 02.00 Nm
XXXX - 009
ESC
GOTO MAIN ADD EDIT
Robertson
Use to select characters
for waypoint name
Use the or to move
cursor to character field.
Use to move cursor to
next line
49