Kongsberg Simrad Robertson AP300X Series Instruction Manual page 115

*
*
*
*
*
*
22081814H
REMOVE THE EPROM FROM THE SOCKET BY
MEANS OF THE SPECIAL EXTRACTION TOOL
(P/N 44139806)
INSERT THE TOOL BY PRESSING THE TWO
GRIP PINS DOWN INTO THE TWO SLOTS IN
THE CORNERS OF THE SOCKET
SQUEEZE THE TOOL AND PULL OUT
THE EPROM
WHEN INSERTING NEW EPROMS, MAKE SURE
THE CUT-OFF CORNER MATCHES WITH THE
ONE IN THE SOCKET.
PRESS IT GENTLY INTO THE SOCKET.
THE IDENTIFICATION TAG INDICATES:
- NAME OF UNIT
- ROBERTSON PART NUMBER
- SOFTWARE VERSION
WARNING:
MAKE SURE THAT THE RIGHT EPROM IS
MOUNTED IN THE ACTUAL UNIT.
EPROM FOR ALL AP300X CONTROL UNITS:
- LANGUAGE ITEM #1 SOFTWARE VERSION V.R. 1
(ENGLISH, GERMAN, FRENCH, SPANISH, ITALIAN)
- LANGUAGE ITEM #2 SOFTWARE VERSION V.R. 2
(ENGLISH, GERMAN, DUTCH, SWEDISH, NORWEGIAN)
EPROM FOR J300X, J300X-40 AND J3000X
JUNCTION UNITS:
AFTER CHANGE OF EPROM, PERFORM A MASTER RESET AS
DESCRIBED ON PAGE 3-34.
Maintenance
GRIP PINS
CUT-OFF
CORNER
IDENTIFICATION
TAG
SLOTS
PART NO. 22081467
PART NO. 22081475
PART NO. 22081640
113