Mounting Brackets - GLP Fusion Stick FS20 Quick Start And Safety Manual

German Light Products®
To secure an FS20 fixture with a safety cable:
Loop a safety cable around a secure anchoring point such as a truss chord or fixed
structure so that it will catch the fixture if a rigging clamp fails. Take up as much
slack as possible in the safety cable (by looping it more than once around the truss
chord, for example).
See Figure 3. Fasten the safety cable to one of the attachment eyelets (arrowed) in
the brackets on the back of the fixture. Check that the fixture is now secured.

Mounting brackets

A pair of tilt brackets for fastening the fixture to a surface at any angle or placing the
fixture on a horizontal surface is supplied with the FS20. Clamp brackets for fastening
rigging clamps to the fixture are available as optional accessories.
To mount either a pair of Clamp Brackets or a pair of Tilt Brackets on the back of a
fixture:
See Figure 4. Push the quarter-turn fasteners on the brackets into the fastener
mounting holes on the back of the fixture.
Turn both quarter-turn fastener handles on each bracket a full 90° clockwise to lock
the brackets to the fixture.
Fusion Stick FS20 Quick Start and Safety Manual Rev. A
Clamp
Brackets
Tilt
Brackets
Figure 4. Bracket options
15