Table of Contents
Advertisement
2 Kit Installation
8.
Correctly wire the SPC. Refer to the manual packaged with the SPC for wiring instructions.
9.
Use the provided M4 x 10 truss head screws to attach the bottom cover. Tighten the screws to a tightening
torque of 0.98 to 1.33 N·m (8.67 to 11.77 in-lb).
Note:
Kit UUX001686 uses 2 screws to attach the bottom cover.
14
Figure 2.11 Wire the SPC
Figure 2.12 Attach the Bottom Cover
YASKAWA TOEPYAISPC03 UL Type 1 Kit for Single Phase Converter Installation Manual
Advertisement
Table of Contents
