Table of Contents
Advertisement
2 Kit Installation
5.
Use the provided M4 x 10 captive pan head screws to attach the heatsink cover. Tighten the screws to a
tightening torque of 0.98 to 1.33 N·m (8.67 to 11.77 in-lb).
Note:
Kit UUX001783 ships with two heatsink covers. Use the information in
stamped on the part for identification. You can discard the unused part.
SPC Model
2037
2045
4056
4093
Note:
Kit UUX001686 uses 2 screws to attach the heatsink cover.
12
Table 2.6 Heatsink Cover Selection for Kit UUX001783
USP04763-1
USP04765-1
Figure 2.8 Attach the Heatsink Cover
YASKAWA TOEPYAISPC03 UL Type 1 Kit for Single Phase Converter Installation Manual
Table 2.6
to select the correct cover. The part number is
Correct Heatsink Cover
Advertisement
Table of Contents
