Table of Contents
Advertisement
3.
Use 4 of the provided M4 x 10 captive pan head screws to attach the top cover. Tighten the screws to a
tightening torque of 0.98 to 1.33 N·m (8.67 to 11.77 in-lb).
4.
Remove the two bottom lifting brackets. You will not need the screws or the brackets after you install the kit.
YASKAWA TOEPYAISPC03 UL Type 1 Kit for Single Phase Converter Installation Manual
Figure 2.6 Attach the Top Cover
Figure 2.7 Remove the Lifting Brackets
2 Kit Installation
11
Advertisement
Table of Contents
