Configuration Of The Et 200X-Desina/Et 200X-Ecofast Distributed I/O Device (Example) - Siemens SIMATIC ET 200X Manual

DP master for ET 200X-DESINA/ET 200X-ECOFAST
The ET-DESINA and ET 200X-ECOFAST can communicate with all DP masters
that behave in compliance with EN 50170, Volume 2, PROFIBUS. However, some
DP masters can process only limited frame lengths.
Check whether the DP master you are using can receive frames from the
ET 200X-DESINA and ET 200X-ECOFAST in their entirety. To ascertain this, you
will find a list of maximum frame lengths in the configuration and parameter
assignment frames for ET 200X at http://www.ad.siemens.de/simatic-cs.
Configuration of ET 200X-DESINA/ECOFAST (examples)
SF
RUN
DC 24 V-NS
DC 24 V-S
X01 X02
DESINA
connector
Figure 1-3

Configuration of the ET 200X-DESINA/ET 200X-ECOFAST distributed I/O device (example)

ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
X1 X2
X1
X3 X4 X3 X4
X5 X6 X5
X7
X8 X8
X7
Basic
module
X2 X1
X2
X3 X4
X3
X6
X5
X6
X7 X8
X7
Expansion modules
Product Overview
X1 X2
X4
X5 X6
X8
1-9