Basic Circuit Diagram For Expansion Module Em 142 Do 8 X Dc 24V/1.2A - Siemens SIMATIC ET 200X Manual

Basic circuit diagram
The following Figure shows the basic circuit diagram for the expansion module.
Socket connections
(see Table 7-30)
Figure 7-15
Covering up unused connections
You must seal off any connections which are not required with M12 screw caps, in
order to ensure that the degree of protection (IP 65, IP 66 or IP 67) is achieved.
ET 200X Distributed I/O Device
EWA 4NEB 780601602-06
Load power supply via
backplane bus
2L+ 2M

Basic circuit diagram for expansion module EM 142 DO 8 x DC 24V/1.2A

2M
Technical Specifications
Backplane bus
interface
7-63