Backup/Restore Device Configuration - Image Sensing Systems RTMS Echo User Manual

Chapter 4:

Backup/Restore Device Configuration

RTMS Echo User Guide
These functions are used to backup the current device configuration or to
restore a previously saved backup file.
The information that is included in the backup file is as follows.
•
Setup File Version
•
Sensor ID
•
Sensor Model
•
Firmware Version
•
Timestamp when saved
•
User Descriptions
•
Location
– Location Source
– Latitude
– Longitude
•
Data Aggregation Config
– Interval
– Classification lengths
•
Data Collection Config
– Drop Inserts When Full (true/false)
•
SX300 Protocol
– ID (1)
– Port (2000)
– Push Statistics (true/false)
– Gap or Headway
– Include Speed85 (true/false)
•
Detection Config
– Device ID (0)
– Last Modified Date
– Software Version
– Config Version
– Actions
•
Sensors
– Sensor Type (Radar)
– Annotations
•
Zones
– Zone Type (vertical line zone)
– ID
– Name
– Start
– End
©2019 Image Sensing Systems Inc.
Operations and Adjustments
4-53