Location Setting - Image Sensing Systems RTMS Echo User Manual

Chapter 4:

Location Setting

RTMS Echo User Guide
This function is used to set the latitude and longitude of where the RTMS Echo
sensor is installed. The location can either be set automatically by GPS or
manually.
1. Click the Settings tab.
2. In the Location section, click change.
3. Is the location to be set automatically or manually.
Automatically
Select the Automatically set via
GPS check box.
4. If a change was made, click Save changes.
©2019 Image Sensing Systems Inc.
Operations and Adjustments
Manually
a) De-select the Automatically
set via GPS check box.
b) Enter the latitude and
longitude.
4-47