Breakout Boxes - Image Sensing Systems RTMS Echo User Manual

Chapter 2:

Breakout Boxes

RTMS Echo User Guide
terminated with an RJ-45 connector, the connector must have an element to
which the ground wire can be connected (see examples below).
Figure 2-2: Example RJ-45 External Ground Connectors
The design of an RTMS Echo installation should include a breakout box close
to the RTMS Echo that can be used for setup and maintenance purposes, and
can include surge suppression circuitry and external communications devices
as required. Reference designs are available. The breakout box should be no
more than 50 ft (15.24 m) from the RTMS Echo sensor (see
Figure 2-3: Typical Breakout Box Installation
Each breakout box should contain a manufacturers approved surge
suppression package, filters, power supply and communications equipment.
©2019 Image Sensing Systems Inc.
Pre-Installation Considerations
Figure 2-3).
2-3