Image Sensing Systems RTMS Echo User Manual page 59

Chapter 4:
RTMS Echo User Guide
5. Select the starting date and time of the query. It will appear in the From
field.
6. Click in the To field and select the ending date and time of the query.
NOTE: The defaults for date/time are the earliest record to the current date
and time.
7. Click Set.
8. Enter the zone(s) for which data is to be included in the download.
To enter multiple zones, separate each entry with a space (e.g., 1 2 4 etc.),
or with a dash for a range a of zones (e.g., 2-5).
To specify all zones, leave the field blank.
9. Select the time frame and enter the interval for which data is to be binned.
The value must be less than or equal the difference between the start and
end times. If omitted, the default is 15 minutes.
10. Enter the length of each class bin.
Multiple bins can be specified by separating the bins with a space (e.g., 5 7
10, etc.).If omitted, the default class bins will be 5, 7, 10, 15, and 20.
11. To run the query, click Download.
The requested data is saved as a CSV file in the Downloads folder.
©2019 Image Sensing Systems Inc.
Operations and Adjustments
4-23