Image Sensing Systems RTMS Echo User Manual page 45

Chapter 4:
RTMS Echo User Guide
Table 4-1: Calibration Page Descriptions (Cont'd)
Item
7 Select to perform vehicle length calibration.
8 Select the check box next to each zone for which the operation is
to be performed.
9 Vehicle count provided by the sensor. Only appears when Vehicle
Counts is the selected operation.
10 Vehicle count provided by the user. Only appears when Vehicle
Counts is the selected operation.
11 The difference between the Sensor and Manual counts. Only
appears when Vehicle Counts is the selected operation.
12 The percentage of the difference between the Sensor and Manual
counts. Only appears when Vehicle Counts is the selected
operation.
13 The speed of a vehicle as determined by the sensor. Only appears
when Speed Calibration is the selected operation.
14 The length of a vehicle as determined by the sensor. Only appears
when Length Calibration is the selected operation.
15 The adjustment the sensor is to make when reporting the data for
each detection. For Speed, the adjustment is in MPH or Kp/h. For
length, the adjustment is in feet or meters.
©2019 Image Sensing Systems Inc.
Operations and Adjustments
Description
4-9