Edit A Zone; Remove A Zone - Image Sensing Systems RTMS Echo User Manual

Chapter 4:

Edit a Zone

Remove a Zone

RTMS Echo User Guide
Move lane
up or down
4. Use the controls to move the position of the lane up or down, to widen the
lane or make it narrower. Note, the lane can also be moved by clicking on
it then moving it with the mouse.
5. To add a name for the zone, enter a maximum of 25 characters, including
alphanumeric, special and space characters.
6. Click the drop-down under Traffic direction and select the direction of
traffic in the zone.
7. Repeat steps Steps 2 – 6
8. After all zones have been added, click Save changes.
This function is used to change the position, name, or traffic flow indicator for a
zone.
1. Click the Zones tab.
2. To change the position of the zone, click on it and when the hand icon
appears, move the zone up or down as needed, or use the controls to
move or widen or make the zone narrower.
3. To change the name, highlight it and enter a new name.
4. To change traffic flow direction, click the drop-down to the right of the
current flow indicator and select a new direction.
5. After all changes have been made, click Save changes.
This function removes a zone permanently from the configuration.
1. Select the zone to be removed.
2. Click the remove (trash can) icon.
3. Click Save changes.
©2019 Image Sensing Systems Inc.
Make lane Make lane
wider narrower
to add other zones.
Operations and Adjustments
Delete
lane
Close
4-7