Image Sensing Systems RTMS Echo User Manual page 33

Chapter 3:
RTMS Echo User Guide
There will be about 1 minute of prep time before detection begins. As
objects are detected the detection heat map appears in the radar beam
image. Zones will appear when the system has determined that the
detected objects are vehicles instead of stationary objects (i.e., barriers,
etc.). The full process takes approximately 7 minutes; however, if all zones
in the detection area appear, you can click All zones found to stop the
process.
3. Click on the first zone.
4. Enter a name for the zone. A maximum of 25 characters can be entered.
©2019 Image Sensing Systems Inc.
Sensor Installation & Setup
3-8