Date And Time Setting - Image Sensing Systems RTMS Echo User Manual

Chapter 4:

Date and Time Setting

RTMS Echo User Guide
This function is used to set the date and time in the RTMS Echo sensor.
1. Click the Settings tab.
2. In the Date and time section, click change.
3. Is the date and time to be set automatically or manually.
Automatically
Select the Automatically set via
GPS check box.
4. Is the date and time to be set according to the connected computer?.
Yes
a) Click the Use computer date
and time icon.
b) Continue with the next step.
5. Select the time zone where the RTMS Echo sensor is installed.
6. If a change was made, click Save changes.
©2019 Image Sensing Systems Inc.
Operations and Adjustments
Manually
a) De-select the Automatically
set via GPS check box.
b) Continue with the next step.
No
a) Click the calendar icon.
b) Select the date and time.
c) Click Set.
d) Continue with the next step.
4-48