Detect And Adjust Zones - Image Sensing Systems RTMS Echo User Manual

Chapter 3:

Detect and Adjust Zones

RTMS Echo User Guide
The automated zone setup process requires free flowing traffic in all lanes of
interest. It scans the range of the RTMS Echo beam and positions up to 12
detection zones, representing lanes where vehicles are detected.
IMPORTANT: If the auto detect function is run after a zones configuration
has already been established (auto detect was run once
before), a new set of internal zone identifiers is established.
The data associated with the previous zones is no longer
available through the queries on the Data page. However, the
data can still be retrieved through use of the Echo APIs if the
zone identifiers of the previous zones are known (see the
Zones Identifier query in the RTMS Echo API Guide).
1. Select the Zones tab.
2. Click Auto Detect Zones.
©2019 Image Sensing Systems Inc.
Sensor Installation & Setup
3-7