Aiming The Sensor - Image Sensing Systems RTMS Echo User Manual

Chapter 3:

Aiming the Sensor

RTMS Echo User Guide
1. Log in to the sensor.
2. Select the Aim tab.
3. Move the left/right side of the sensor up or down to adjust the roll
according to the slant of the road.
For a level road, the roll should be set to -0.
4. Tilt the sensor forward or back to adjust the tilt to match the specifications
in "Height, Setback, Tilt Requirements" on page
5. Tighten the nuts securing the sensor to the mounting bracket.
6. Detect and adjust zones.
©2019 Image Sensing Systems Inc.
Sensor Installation & Setup
2-11.
3-6