Image Sensing Systems RTMS Echo User Manual page 73

Chapter 4:
RTMS Echo User Guide
3. Click Save as file name and enter a name for the file.
The name can be any number of alphanumeric, dash (-), underscore (_) or
space characters. The default is speed-bin.
4. Click the icon to the right of the date/time field.
5. Select the starting date and time of the query. It will appear in the From
field.
6. Click in the To field and select the ending date and time of the query.
NOTE: The defaults for date/time are the earliest record to the current date
and time.
7. Click Set.
8. Enter the zone(s) for which data is to be included in the download.
To enter multiple zones, separate each entry with a space (e.g., 1 2 4 etc.),
or with a dash for a range a of zones (e.g., 2-5).
To specify all zones, leave the field blank (default).
9. Select the time frame and enter the interval for which data is to be binned.
The value must be less than or equal the difference between the start and
end times. If omitted, the default is 15 minutes.
10. Enter the speed of the initial bin.
If omitted, the default value is 20.
©2019 Image Sensing Systems Inc.
Operations and Adjustments
4-37