Chapter 4:Operations And Adjustments; General; Logging In To The Rtms Echo - Image Sensing Systems RTMS Echo User Manual

Chapter 4: Operations and Adjustments

General

Logging in to the RTMS Echo

RTMS Echo User Guide
This chapter describes operations that can be performed and adjustments that
can be made after the RTMS Echo is installed and configured.
The following describes the procedure for logging in to the RTMS Echo. after
you have set the network parameters for the sensor (see
Setting" on page 4-45).
1. Start your internet browser. Note, the screen shots shown below are taken
from Google Chrome and Firefox.
2. In the address field, type the IP address of the RTMS Echo.
3. Press Enter.
The RTMS Echo login window appears.
4. Enter the User name and Password. The defaults are:
•
User name: admin
•
Password: admin
5. Click Login.
©2019 Image Sensing Systems Inc.
"Local Area Network
4-1