Table of Contents
Advertisement
2.2 Technical Specifications
Supported Modules
COM Express Type 6 compliant modules
Mass Storage interfaces
2 x S-ATA connectors
1 x mSATA Slot
Video Interfaces
1 x LVDS (18bit/24bit, single/dual channel) 34 pin connector
1 x eDP connector
1 x backlight connector
2 x combo DP / HDMI Connectors
1x multimode Display Port Connector
1 x VGA connector
8-pin socket for external DID EEPROM
PCI Express Graphics x16 slot
Audio
Internal HD Audio Codec
Triple Audio jack
S/P-DIF Out 3 pin header for digital Audio
Internal pin header for audio jacks' remoting
USB
4 x USB3.0 Host ports on type-A sockets
2 x USB2.0 Host ports on internal pin header
PCI Express
1 x PCI-e x4 slot, Gen2 compatible
2 x miniPCI-e slot Full/Half Size, (one combined with SIM card slot), Gen2
compatible
Networking
2 x Gigabit Ethernet ports
Other Interfaces
I2C EEPROM Socket
LPC Bus internal pin header
Front Panel Header
1 x 28 pin connector for additional features (I2C, ACPI signals, SM Bus, Watch
Dog, Thermal Management)
Internal pin header for GPIO/SDIO + 2 x RS-232 Serial ports (Tx/Rx signals)
SIM Card slot
Tachometric FAN connector, selectable +12V or +5V
Power supply voltage: ATX Standard power connector 24 poles (AT mode
configurable)
+12V auxiliary power connector
Coin cell battery Holder for CMOS and RTC
Operating temperature:
0°C ÷ +60°C *
"
Dimensions: 170 x 170 mm (6.69
x 6.69
* Temperature ranges indicated mean that all components available onboard
are certified for working with a Tcase included in these temperature ranges.
This means that it is customer
Tcases remain in the range above indicated. Please also check paragraph
4.1.
"
)
'
s responsibility to ensure that all components
'
Advertisement
Table of Contents
