Seco CCOMe-C30 User Manual

Carrier board for com-express type 6 module on 3.5 inch form factor

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

CCOMe-C30

Carrier Board for COM-Express Type 6 Module

on 3.5" form factor

Table of Contents

Summary of Contents for Seco CCOMe-C30

Page 1 CCOMe-C30 Carrier Board for COM-Express Type 6 Module on 3.5” form factor...
Page 2 SECO S.p.A. reserves the right to change precise specifications without prior notice to supply the best product possible. For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the dedicated web form available at http://www.seco.com...
Page 3: Table Of Contents
M.2 WLAN Slot: Socket 1 Key E Type 2230 ..................................34 3.3.7 M.2 WWAN Slot: Socket 2 Key B Type 2242 / 3042 ................................35 CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 4 Accessories ..............................................55 4.2.1 Front Panel I/O board ........................................... 55 4.2.2 USB-to-Serial port converter modules ....................................56 CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 5 RMA number request • Safety • Electrostatic Discharges • RoHS compliance • Terminology and definitions • Reference specifications CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 6: Warranty
All changes or modifications to the equipment not explicitly approved by SECO S.p.A. could impair the equipment s functionality and could void the warranty. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 7: Information And Assistance
SECO Sales Representative: the Sales Rep can help to determine the exact cause of the problem and search for the best solution. • SECO Help-Desk: contact SECO Technical Assistance. A technician is at disposal to understand the exact origin of the problem and suggest the correct solution.
Page 8: Safety
Check carefully that all cables are correctly connected and that they are not damaged. 1.5 Electrostatic Discharges The CCOMe-C30 board, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the devices and/or components on-board.
Page 9: Terminology And Definitions
Subscriber Identity Module, a card which stores all data of the owner necessary to allow him accessing to mobile communication networks CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 10 Transistor-transistor Logic User Identity Module, an extension of SIM modules. Universal Serial Bus V_REF Voltage reference Pin CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 11: Reference Specifications
SD Card Association https://www.sdcard.org SM Bus http://www.smbus.org/specs TMDS http://www.latticesemi.com/view_document?document_id=38351 USB 2.0 and USB OTG http://www.usb.org/developers/docs/usb20_docs/usb_20_080117.zip USB 3.0 http://www.usb.org/developers/docs/usb_31_080117.zip CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 12: Introduction
• Introduction • Technical Specifications • Electrical Specifications • Mechanical Specifications • Block Diagram CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 13: Introduction
This versatility allows the designer to create a dense and optimised package, which results in a more reliable product while simplifying system integration. CCOMe-C30 board can be used both as an evaluation module, to test the functionality of your COM-Express module and design an application specific carrier board for it, or as a complete carrier board, already suited for standard purposes, with a small space consumption.
Page 14: Technical Specifications
2.2 Technical Specifications Supported Modules Networking COM Express Type 6 compliant modules Dual RJ-45 connector (1 port managed by COM Express Gigabit Ethernet Mass Storage interfaces ® interface, 1 port managed by Carrier board’s Intel I210 GbEthernet controller) SATA 7p M connector M.2 Socket 2 2242 / 3042 Key B slot for WWAN modules (modem) M.2 Socket 2 2242 / 2260 Key B slot for SSD M.2 Socket 1 2230 Key E slot for WiFi / BT modules...
Page 15: Electrical Specifications
Batteries supplied with CCOMe-C30 board are compliant to requirements of European Directive 2006/66/EC regarding batteries and accumulators. When putting out of order CCOMe-C30 board, remove the batteries from the board in order to collect and dispose them according to the requirement of the same European Directive above mentioned.
Page 16: Power Rails Meanings
_U: unswitched ACPI S3 voltages, i.e. power rails that are active both in ACPI’s S0 (Working) and S3 (Standby) state. Examples: +1.5V_U CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 17: Mechanical Specifications
In order to fix the COM Express module to the carrier board, on CCOMe-C30 have been soldered six metallic spacers, height 8mm, 2.5mm diameter. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 18: Block Diagram
2.5 Block Diagram Gigabit Ethernet 1x USB 2.0 DDI #0 Dual RJ-45 USB 3.0 upright 1x USB SS DP++ connector Ethernet connector Type-A connector PCI-e x1 Gigabit Ethernet controller 2 x USB 2.0 2 x USB SS DDI #1 Dual USB 3.0 miniDP++ VCC_RTC Type-A connector...
Page 19: Connectors
• Connectors placement • Connectors overview • Connectors description CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 20: Connectors Placement
3.1 Connectors placement On CCOMe-C30 carrier board, there are several connectors. Some of them are standard connectors, like Display Port, HDMI, Gigabit Ethernet, USB ports, and are placed on the same side of the board, so that they can be placed on a panel of a possible enclosure.
Page 22: Connectors Overview
Backlight enable signal voltage level selector JP16 Backlight voltage selector VDD enable signal voltage level selector JP17 LVDS panel voltage selector CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 23: Connectors Description
SATA0 Receive Data + SATA0_RX+ SATA1_RX+ SATA1 Receive Data + SATA0 Receive Data - SATA0_RX- SATA1_RX- SATA1 Receive Data - CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 24 Not Connected Not Connected N.C. SYS_RESET# Reset Button Input LPC serial interrupt request LPC_SERIRQ CB_RESET# Board Reset Output CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 25 LVDS Ch. B Data 3 - LVDS Ch. A Data 3 - LVDS_A3- LVDS_BKLT_EN LVDS Panel Backlight ON Power Ground Power Ground CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 26 +12V switched power supply +12V_S A109 B109 +12V_S +12V switched power supply Power Ground A110 B110 Power Ground CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 27 DDI1_PAIR0+ Digital Display interface 1 pair 0+ Not Connected RSVD DDI1_PAIR0- Digital Display interface 1 pair 0- CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 28 Not Connected Not Connected N.C. N.C. Not Connected Type1 signal: Not Connected TYPE1# TYPE2# Type2 signal: +5V_A CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 29 Power Ground Not Connected N.C. N.C. Not Connected Not Connected N.C. N.C. Not Connected Power Ground Power Ground CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 30 +12V switched power supply +12V_S C109 D109 +12V_S +12V switched power supply Power Ground C110 D110 Power Ground CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 31: Sata Connectors
Here following the signals related to SATA interface: SATA1_TX+/SATA1_TX-: Serial ATA Channel #1 Transmit differential pair. SATA1_RX+/SATA1_RX-: Serial ATA Channel #1 Receive differential pair. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 32: M.2 Ssd Slot: Socket 2 Key B
COM Express module used doesn’t have these signals connected, then this slot will not be usable. SATA0_RX+ SATA0_RX- SATA0_TX- SATA0_TX+ +3.3V_S +3.3V_S +3.3V_S CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 33: Microsd Card Slot
This interface is available only by removing the jumper JP5 (as described in the previous GPO0 +3.3V_A paragraph) GPO1 GPI0 GPO2 GPI1 GPO3 GPI2 GPI3 CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 34: M.2 Wlan Slot: Socket 1 Key E Type 2230
CN11. This signal is directly managed using jumper JP15, as described M.2_WAKE# W_DISABLE1_E# in the table below. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 35: M.2 Wwan Slot: Socket 2 Key B Type 2242 / 3042
This signal is connected to PCIE_Rx2- CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 36 M.2 WWAN module JP2 position M.2 WWAN module Inserted Disabled Inserted Disabled Not inserted Enabled Not inserted Enabled CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 37: Microsim Card Slot
PEG_Rx3+/ PEG_Rx3-: PCI-e GFX port x4 lane #3, Receiving Input Differential pair NVME_CLK_Clock+ / NVME_Clock-: PCI Express Reference Clock for the PCI Express lanes, CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 38 This signal is connected to COM Express module’s WAKE0# signal. PEG_Tx0- PEG_Tx0+ NVME_RST# NVME_CLK- M.2_WAKE# NVME_CLK+ +3.3V_S +3.3V_S +3.3V_S CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 39: Dual Gigabit Ethernet Connector
GBEx_MDI3+/GBEx_MDI3-: Ethernet Controller #x Media Dependent Interface (MDI) I/O differential pair #3. It is the fourth differential pair in Gigabit Ethernet mode; it is not used in 10/100Mbps modes. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 40: Usb Connectors
USB_SSRXx+ / USB_SSRXx+: USB Superspeed port #x receiving input differential pair USBx+ / USBx-: USB 2.0 Port #x differential pair CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 41 Common mode chokes are placed on all USB differential pairs for EMI compliance. For ESD protection, on all data and voltage lines are placed clamping diodes for voltage transient suppression. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 42: Single/Dual Channel Lvds Connector
CN33. Selectin between these two interfaces can be don by using Jumper JP10. Not Inserted LVDS CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 43: Lcd Voltages And Backlight Control Signals Connector
Similarly, backlight enable signal, LVDS_BKLT_EN, can be regulated to be at +5V_S or +3.3V_S voltage level, using jumper JP8. Inserted +5V_S Not Inserted +3.3V_S CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 44 The LCD backlight voltage, i.e. signal VDD_BKLT, can be regulated to be +12V_S or +5V_S, using jumper JP16. +12V_S +5V_S CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 45: Edp Connector
PTN_SMB_DAT: SM Bus control data line for external eDP-to-LVDS bridge adapter. Bidirectional signal, JP13 position External eDP-to-LVDS adapter electrical level PTN_PWR. Inserted Enabled Not Inserted Disabled CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 46: Displayport Connectors
DDIx_PAIR2+/DDIx_PAIR2-: DDI Interface #x Differential Pair #2. Can be used as Display Port DDI1_PAIR2- DDI1_CTRLDATA_AUX- differential pair #2 or TMDS (HDMI) differential pair #0. +3.3V_S CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 47: Fan Connector
FAN_POWER: +12V_S derived power rail for FAN, managed by PWM signal FAN_PWMOUT coming from COM Express connector. FAN_TACHO_IN: tachometric input from the fan to the COM Express module CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 48: Audio Section
Line_Out_L: Line Out Left Channel. R: Line Out Right Channel. Line_Out_ Sense2_return: Line Out Jack detection return signal. CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 49: Com Ports Pin Header
COM #1 Working Mode JP4 position COM #2 Working Mode RS-422 RS-422 RS-232 RS-232 Not Inserted RS-485 Not Inserted RS-485 CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 51: Switch / Led Header Interface
SW2 (respectively), so it is not mandatory to connect them externally using CN19. As already written in the previous paragraph dedicated to Audio interface, it is also possible to buy SECO’s dedicated front panel module, which offers two standard audio jacks, two pushbuttons (for reset and power on) and two LEDs, for SATA activity and Power status signalling.
Page 52: Bios Disable Signals
Not used Inserted Not inserted Module Carrier SPI0 Carrier SPI0/SPI1 Inserted Inserted Carrier Module SPI1 Module SPI0/SPI1 CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 54: Thermal Design
Heavy computational tasks will generate much heat. Indeed, when using CCOMe-C30 carrier board with any COM Express module, it is necessary to consider carefully the global heat generated by the system, and the scenario of utilisation.
Page 55: Accessories
Please be aware that this module is useful only for remoting the buttons and the audio jacks, but it is not needed for working of CCOMe-C30 board. Indeed, Power and Reset button functionalities are ensured also by the two pushbuttons SW1 and SW2 embedded on the carrier itself. Only the Audio functionalities are not directly exploitable on the carrier board.
Page 56: Usb-To-Serial Port Converter Modules
USB to RS422 serial port converter with RJ-45 connector VA13-0000-2300-C0 USB to RS485 serial port converter with RJ-45 connector CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 57 PTN_SMB_DAT eDP_AUX+ PTN_SMB_CLK eDP_AUX- SW_BACK SW_BACK SW_VDD SW_BACK SW_VDD SW_BACK SW_VDD 3.3V_S CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 58 All the signals necessary for working of the eDP to LVDS converter module can be found on connector CN2, which can be paired to CCOMe-C30 board using a 1:1 direct cable connection. For the occurrences when the module is paired to different boards, or...
Page 60 DDC Channel available on module’s connector CN3. In this case, dip switch +3.3V_S #2 on SW1 must be set to OFF). +3.3V_S LVDS_I2C_CLK LVDS_I2C_DAT CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Page 61 SECO S.p.A. - Via A. Grandi, 20 52100 Arezzo - ITALY Ph: +39 0575 26979 - Fax: +39 0575 350210 www.seco.com CCOMe-C30 CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.

Seco CCOMe-C30 User Manual

Quick Links

Related Manuals for Seco CCOMe-C30

Summary of Contents for Seco CCOMe-C30

Table of Contents