Connectors Placement - Seco COM-Express CCOMe-965 User Manual

3.1 Connectors placement

On CCOMe-965 carrier board, there are several connectors. Some of them are standard connectors, like VGA, Display Port, HDMI, Gigabit Ethernet, USB3.0
ports, Audio Jacks, and are placed on the same side of the board, so that they can be placed on a panel of a possible enclosure.
In the following picture it is possible to see the position of each connector.
ATX power Auxiliary SPI Flash
connector Power holder
I2C
EEPROM
Battery
holder
FAN
connector
USB internal
header
LVDS
EEPROM
Feature
connector
LPC header
GPIO/SD +
UART
header
DP + HDMI VGA + DP
connectors connector
CCOMe-965
CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
TOP SIDE
LVDS Switch/LED
Power button
connector header
USB 3.0
HD Audio
ports +
Jacks
GbEthernet
eDP
Reset button
connector
Backlight
connector
mSATA Slot
2 x S-ATA
connectors
COM
Express
connectors
PCI-e
graphics x16
slot
PCI-e x4 slot
Audio Front
Panel header
S/P-DIF
connector
BOTTOM SIDE
miniPCI-e
slot #0
miniPCI-e miniSIM card
slot #1 slot
20