Table of Contents
Advertisement
2.2 Technical Specifications
Supported Modules
®
Qseven
Rel. 2.0 compliant modules
Mass Storage interfaces
SATA Female 7p connector with dedicated Power connector, interface shared
with mSATA Slot
SATA Male 7+15p connector
SD/MMC Card Slot
SPI Flash Sock
I2C EEPROM Socket
Video Interfaces
HDMI / Display port interface on PCI-e x16 slot
LVDS / eDP interface on PCI-e x8 slot
USB
1 x USB3.0 Host port on type-A socket
1 x USB 3.0 OTG port on micro-AB socket
2 x USB2.0 Host ports on internal pin header (alternative to USB 3.0 port #0)
Up to 4 x USB2.0 Host ports on quad Type-A socket
PCI Express
PCI-e x 4 interface on dedicated PCI-e x 16 slot shared with 3 x PCI-e x1 slots +
miniPCI-e slot (selection via jumper)
Networking
Gigabit Ethernet connector
Audio
Embedded HD Audio Codec, Realtek ALC888
2 x Triple HD Audio jacks
2 x S/P-DIF connectors (In & Out)
Audio Expansion Slot
Serial Ports
CAN Bus (both at TTL interface on internal pin header, and with CAN transceiver
on DB9 connector)
3 x RS-232 only ports
2 x RS-232/RS/422/RS-485 configurable serial ports
Other Interfaces
Feature Connector, with I2C, SM Bus, Watchdog, Thermal and Power
Management Signals
LPC Bus Header
SPI Pin Header
SIM Card slot
4 x 7-segment LCD displays for POST codes
PS/2 Mouse/keyboard internal pin strip
2 x tachometric FAN connectors
Power, Reset, LID and Sleep Buttons
Debug Port on mini-B USB connector
Power supply: +12V
power Jack and Mini-fit Standard ATX power connector
DC
Coin cell battery Holder for CMOS and RTC
Operating temperature:
0°C ÷ +60°C (commercial temperature range) *
"
Dimensions: 345 x 170 mm (13.58
x 6.69
* Temperature ranges indicated mean that all components available onboard
are certified for working with a Tcase included in these temperature ranges.
This means that it is customer
Tcases remain in the range above indicated.
"
)
'
s responsibility to ensure that all components
'
Advertisement
Table of Contents
