Table of Contents
Advertisement
2.2 Technical Specifications
Supported Modules
COM Express Type 6 compliant modules
Mass Storage interfaces
4x SATA 7p M connectors
µSD Card slot (interface multiplexed with GPIO header)
Video Interfaces
3 x DP++ connectors
VGA connector
LVDS 24-bit Single/Dual Channel Connector
LVDS External EDID flash socket
eDP 4-lanes 40 poles VESA connector
Audio
On-board HD Audio Codec (Cirrus Logic CS4207)
Mic In + Line Out internal pin header
HD Audio Jacks
S/PDIF Out Optical connector
USB
4 x USB 3.1 Host ports on Type-A sockets
4 x USB 2.0 Host ports on Quad Type-A sockets
Networking
1x RJ-45 connector
PCI-e
2x PCI-e x4 Slots
1x PCI-e x16 Slot
Serial Ports
2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board's
LPC Dual UART controller)
2 x RS-232 ports on dedicated pin header (from module)
Other Interfaces
4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot)
SPI Flash header
Button / LEDs front panel header
4-pin tachometric FAN connector
I2C + SM Bus on feature Pin header
FuSa Header
I2C Flash Socket
JTAG connector
LPC internal header
USB overcurrent header
SM Bus Smart Battery Connector
4 x 7-segment LCD displays for POST codes
LPC/eSPI internal header
Power supply: ATX 24 poles connector for carrier board working only
Auxiliary 12V connector for carrier board working only
12 V
power in connector for COM Express
DC
Coin-cell holder for RTC
Operating temperature: 0°C ÷ +60°C * (Commercial version)
Dimensions:
* Temperature ranges indicated mean that all components available onboard
are certified for working with a Tcase included in these temperature ranges.
This means that it is customer
Tcases remain in the range above indicated. Please also check paragraph
4.1.
'
s responsibility to ensure that all components
'
Advertisement
Table of Contents
