Table of Contents
Advertisement
3.3.18 Audio Section
CCOMe-965 integrates a High Definition Audio Codec, Realtek ALC888-GR, for high quality audio implementation.
Triple Audio Jack - CN14
Colour
Signal
Light Blue
Line IN (Left + Right)
Light Green
Front_OUT (Left + Right)
Pink
MIC IN (Left + Right)
S/PDIF OUT connector - CN15
Pin
Signal
1
GND
2
+5V_S
3
S/PDIF_OUT
HD Audio Front Panel Header - CN16
Pin
Signal
Pin
1
Port1L
2
3
Port1R
4
5
Port2R
6
7
Audio_GND
Mechanical Key
9
Port2L
10
standard audio jacks, two pushbuttons (for reset and power on) and two LEDs, for SATA activity and Power status signalling. Please also check chapter 4.2.1 for
further details.
Signals Description:
Port1L: Analog Port 1 (Microphone) Left Channel.
CCOMe-965
CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
Standard Stereo audio signals are carried on a standard HD Stereo triple jack connector, type LOTES
ABA-JAK-028-K07 (light blue/light green/pink) or equivalent.
Directly managed by Realtek ALC888-GR High Definition Audio Codec, there is also one S/PDIF
connector, for the link to digital audio media. Connector is type TYCO 5-103669-2 or equivalent.
Mating connector Tyco 5-103956-2.
In order to give the maximum audio capabilities to CCOMe-965 carrier board, it is
also available a dedicated 9-pin 2.54mm pitch Pin header for external connection
of a second Line In (Port2) and a second Mic In (Port1). These additional audio
Signal
inputs are managed by the same Realtek ALC888-GR HD Audio Codec.
Audio_GND
Pinout hereby shown is compliant to "Intel
PRESENCE#
specifications, par. 2.3.5 Table 7.
Sense1_Return
Using this dedicated connector, it will be possible to connect any Azalia compliant panel audio
jack to remote audio connectors in the preferred position.
Sense2_Return
Alternatively, it is also possible to buy SECO's dedicated front panel module, which offers two
®
Front Panel I/O connectivity Design Guide"
50
Advertisement
Table of Contents
