1. Manuals
  2. Brands
  3. Seco Manuals
  4. Carrier boards
  5. COM-Express CCOMe-965
  6. User manual

Seco COM-Express CCOMe-965 User Manual

Type 6 module on mini-itx form factor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CCOMe-965
Carrier Board for COM-Express Type 6 Module
on mini-ITX form factor

Advertisement

Table of Contents
loading

Related Manuals for Seco COM-Express CCOMe-965

Summary of Contents for Seco COM-Express CCOMe-965

  • Page 1 CCOMe-965 Carrier Board for COM-Express Type 6 Module on mini-ITX form factor...
  • Page 2 SECO S.r.l. reserves the right to change precise specifications without prior notice to supply the best product possible. For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the dedicated web form available at http://www.seco.com...

  • Page 3: Table Of Contents

    ........................................... 34 3.3.6 miniSIM Card Slot ..........................................36 3.3.7 USB 3.0 + Gigabit Ethernet combo connectors ..................................36 CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 4 Accessories ..............................................59 4.2.1 Front Panel I/O board ........................................... 59 4.2.2 USB-to-Serial port converter modules ....................................60 CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 5 Warranty Information and assistance RMA number request Safety Electrostatic Discharges RoHS compliance Terminology and definitions Reference specifications CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 6: Warranty

    All changes or modifications to the equipment not explicitly approved by SECO S.r.l. could impair the equipment s functionality and could void the warranty. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 7: Information And Assistance

    SECO Sales Representative: the Sales Rep can help to determine the exact cause of the problem and search for the best solution. SECO Help-Desk: contact SECO Technical Assistance. A technician is at disposal to understand the exact origin of the problem and suggest the correct solution.

  • Page 8: Safety

    The CCOMe-965 board is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 9: Terminology And Definitions

    Pulse Width Modulation Power SATA Serial Advance Technology Attachment, a differential half duplex serial interface for Hard Disks CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 10 Transistor-transistor Logic User Identity Module, an extension of SIM modules. Universal Serial Bus V_REF Voltage reference Pin CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 11: Reference Specifications

    SD Card Association https://www.sdcard.org/home SM Bus http://www.smbus.org/specs TMDS http://www.siliconimage.com/technologies/tmds USB 2.0 and USB OTG http://www.usb.org/developers/docs/usb_20_070113.zip USB 3.0 http://www.usb.org/developers/docs/usb_30_spec_070113.zip CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 12: Chapter 1. Introduction

    Chapter 2. Introduction Technical Specifications Electrical Specifications Mechanical Specifications Block Diagram CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 13: Introduction

    The robust thermal and mechanical concept, combined with extended power-management capabilities, is perfectly suited for all applications. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 14: Technical Specifications

    2.2 Technical Specifications Supported Modules PCI Express COM Express Type 6 compliant modules 1 x PCI-e x4 slot, Gen2 compatible Mass Storage interfaces 2 x miniPCI-e slot Full/Half Size, (one combined with SIM card slot), Gen2 compatible 2 x S-ATA connectors Networking 1 x mSATA Slot 2 x Gigabit Ethernet ports...

  • Page 15: Electrical Specifications

    The use of wires with section 18 AWG is recommended, in order to ensure the proper amperage of the power section. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 16: Rtc Battery

    _U: unswitched ACPI S3 voltages, i.e. power rails that are active both in ACPI’s S0 (Working) and S3 (Standby) state. Examples: +1.5V_U CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 17: Mechanical Specifications

    In order to fix the COM Express module to the carrier board, on CCOMe-965 have been soldered five metallic spacers, height 8mm, 2.5mm diameter. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 18: Block Diagram

    LVDS_PPEN FACTORY ALTERNATIVES Power LVDS DDC LVDS EDID EEPROM LVDS connector Audio socket Section CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 19: Chapter 3. Connectors

    Chapter 3. Connectors placement Connectors overview Connectors description CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 20: Connectors Placement

    DP + HDMI VGA + DP HD Audio ports + slot #1 slot connectors connector Jacks GbEthernet CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 21: Connectors Overview

    LCD Voltage Select JP7 / JP8 BIOS Boot selectors Backlight Voltage Select ATX/AT mode select HDMI/DVI display #1 differentiation CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 22: Connectors Description

    SATA0 Receive Data + SATA0_RX+ SATA1_RX+ SATA1 Receive Data + SATA0 Receive Data - SATA0_RX- SATA1_RX- SATA1 Receive Data - CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 23 Not Connected Not Connected N.C. SYS_RESET# Reset Button Input LPC serial interrupt request LPC_SERIRQ CB_RESET# Board Reset Output CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 24 LVDS Channel B Data 3 - LVDS Channel A Data 3 - LVDS_A3- LVDS_BKLT_EN LVDS Panel Backlight ON Power Ground Power Ground CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 25 +12V switched power supply +12V_S A109 B109 +12V_S +12V switched power supply Power Ground A110 B110 Power Ground CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 26 DDI1_PAIR0+ Digital Display interface 1 pair 0+ Not Connected RSVD DDI1_PAIR0- Digital Display interface 1 pair 0- CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 27 PCI-E x16 Lane 1 RX- PEG_RX1- PEG_TX1- PCI-E x16 Lane 1 TX- Type1 signal: Not Connected TYPE1# TYPE2# Type2 signal: +5V_A CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 28 PCI-E x16 Lane 10 TX+ PCI-E x16 Lane 10 RX- PEG_RX10- PEG_TX10- PCI-E x16 Lane 10 TX- Power Ground Power Ground CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 29 +12V switched power supply +12V_S C109 D109 +12V_S +12V switched power supply Power Ground C110 D110 Power Ground CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 30: Ata Connectors

    S-ATA #1 Connector - CN25 SATA1_RX+/SATA1_RX-: Serial ATA Channel #1 Receive differential pair. Signal SATA1_Tx+ SATA1_Tx- SATA1_Rx- SATA1_Rx+ CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 31: Msata Slot

    SATA2_TX- N.C. SATA2_TX+ N.C. N.C. +3.3V_S +3.3V_S N.C. N.C. N.C. N.C. N.C. N.C. N.C. N.C. mSATA_DET# +3.3V_S CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 32: Pci-E X4 Slot

    Power Ground PCIE_RX0+ PCI-e Receiver lane 0+ Hot Plug presence detect PRSNT2# PCIE_RX0- PCI-e Receiver lane 0- CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 33 In case that these pins are not tied together on the add-in card, then the carrier board will not acknowledge the presence of the card in the slot, and will not enable the reference clock (and the add-in card will not work). CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 34: Minipci-Express Slots

    Yellow Led, D2: Wireless_LAN #0 present (for wireless networks 802.11b/g/a) N.C. Red Led, D1: Wireless_PAN #0 present (Bluetooth) N.C. +3.3V_A CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 35 Green Led, D6: Wireless_WAN #1 present N.C. Yellow Led, D5: Wireless_LAN #1 present N.C. +3.3V_A Red Led, D4: Wireless_PAN #1 present CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 36: Minisim Card Slot

    Cables category Cat6 are recommended for noise reduction and EMC compatibility issues, especially when the length of the cable is significant. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 37 2.0 cable. Avoid using USB 3.0 cables if the COM Express module used doesn’t offer such an interface. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 38: Usb6-7 Pin Header

    Common mode chokes are placed on all USB differential pairs for EMI compliance. For ESD protection, on all data and voltage lines are placed clamping diodes for voltage transient suppression. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 39: Vga Connectors

    Mating connector: MOLEX p/n 22-25-2162 with 70058 series female crimp terminals. GREEN BLUE N.C. +5V_VGA N.C. CRT_I2C_DAT HSYNC VSYNC CRT_I2C_CK N.C. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 40: Lvds Connector

    90Ω @ 100MHz common mode chokes are placed on all LVDS differential pairs for EMI LVDS_B_CK- N.C. reduction. LVDS_B3+ LVDS_B3- CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 41: Backlight Connector

    SW_BACK_FUSE Voltage Value +5V_S, using jumper JP3, which is another standard pin header, P2.54mm, 1x3 pin. +12V_S +5V_S CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 42: Display Id Eeprom Socket

    It is necessary a small rework of the carrier board in order to use eDP interface instead of LVDS. eDP_TX1+ Please contact SECO for details about the rework instructions, if wanted. eDP_TX1- eDP_HPD N.C. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 43: Displayport / Hdmi Connectors

    TMDS1_LANE0+ TMDS1_LANE0- TMDS1_CLK+ JP4 position TMDS1 Connected to TMDS1_CLK- HDMI display TMDS1_I2C_CLK TMDS1_I2C_DAT DVI dongle +5V_HDMI1 TMDS1_HPD CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 44 DVI dongle HDMI Section Signal Signal TMDS2_LANE2+ TMDS2_LANE2- TMDS2_LANE1+ TMDS2_LANE1- TMDS2_LANE0+ TMDS2_LANE0- TMDS2_CLK+ TMDS2_CLK- TMDS2_I2C_CLK TMDS2_I2C_DAT +5V_HDMI2 TMDS2_HPD CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 45: Digital Display Interface #3 Connector

    DDI3_DDC_AUX_SEL: DDI Interface #3 Cable Adapter Detect signal. When this signal is detected high, then on the connector there is the TMDS interface (it means that a DP-to-HDMI adapter is connected). CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 46: Peg (Pci Express Graphics X16) Connector

    PCI-e Graphics reference clock lane - PCI-e Graphics Transmitter lane 0- PEG_TX0- Power Ground Power Ground PEG_RX0+ PCI-e Graphics Receiver lane 0+ CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 47 PCI-e Graphics Receiver lane 6- PCI-e Graphics Transmitter lane 7+ PEG_TX7+ Power Ground PCI-e Graphics Transmitter lane 7- PEG_TX7- Power Ground CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 48 Power Ground PCI-e Graphics Transmitter lane 14- PEG_TX14- Power Ground Power Ground PEG_RX14+ PCI-e Graphics Receiver lane 14+ CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 49: Fan Connector

    FAN_POWER: +12V_S derived power rail for FAN, managed by PWM signal FAN_PWMOUT coming from COM Express connector. FAN_TACHO_IN: tachometric input from the fan to the COM Express module CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 50: Audio Section

    (for reset and power on) and two LEDs, for SATA activity and Power status signalling. Please also check chapter 4.2.1 for further details. Signals Description: Port1L: Analog Port 1 (Microphone) Left Channel. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 51: I2C Eeprom Socket

    A0 = 0 A0 = 1 A1 = 0 A1 = 1 A2 = 0 A2 = 1 CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 52: Spi Flash Socket

    LPC_RST# signal is derived by CB_RST# signal, simply by biasing it using a Ultra High Speed CMOS buffer. LPC_FRAME# LPC_AD3 LPC_RST# LPC_CLK +3.3V_S +3.3V_S CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 53: Feature Internal Pin Header

    Ultra High Speed CMOS buffer. +3.3V_A +3.3V_S PS_ON SUS_S3# SUS_S4# THRMTRIP# SUS_S5# THRM# SUS_STAT# PWR_OK CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 54: Switch / Led Header Interface

    M11 (respectively), so it is not mandatory to connect them externally using CN34. As already written in the previous paragraph dedicated to Audio interface, it is also possible to buy SECO’s dedicated front panel module, which offers two standard audio jacks, two pushbuttons (for reset and power on) and two LEDs, for SATA activity and Power status signalling. Please also check chapter 4.2.1 for further details.

  • Page 55: Uart + Gpio/Sd Pin Header

    SDIO_DAT[0÷3]: SD Card data bus. SDIO_DAT0 signal is used for all communication modes. SDIO_DAT[1÷3] signals are required for 4-bit communication mode. CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 56: Bios Device Selection

    Boot from COM Express Module’s internal BIOS and load Inserted Inserted management data from carrier board’s SPI Flash CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 57 Chapter 4. Thermal Design Accessories CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 58: Thermal Design

    This is particularly needed for industrial grade modules. SECO can provide COM Express modules’ specific heatspreaders and heatsinks (active and passive), but please remember that their use must be evaluated accurately inside the final system (electronics + mechanics), and that they should be used only as a part of a more comprehensive ad-hoc cooling solutions, which also keeps the surface temperature of all carrier board’s components in the temperature range specified for the specific carrier board configuration (industrial or...

  • Page 59: Accessories

    Indeed, Power and Reset button functionalities are ensured also by the two pushbuttons M11 and M12 embedded on the carrier itself, while the Triple Audio jack of the carrier ensures the audio functionalities. Ordering Code Description V995-0000-0000-C0 Front Panel I/O board CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

  • Page 60: Usb-To-Serial Port Converter Modules

    USB to RS422 serial port converter with RJ-45 connector VA13-0000-2300-C0 USB to RS485 serial port converter with RJ-45 connector CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
  • Page 61 SECO Srl - Via Calamandrei 91 52100 Arezzo - ITALY Ph: +39 0575 26979 - Fax: +39 0575 350210 www.seco.com CCOMe-965 CCOMe-965 - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.

Table of Contents