AccuTemp Accu-Steam G2 Series Installation & Operator's Manual page 6

1.2 WARNING & CAUTION NOTES
IMPORTANT: Read the following safety installation to avoid personal injury or death and to avoid
damage to the equipment or property
Improper installation, adjustment,
alteration, service or maintenance can cause
property damage, injury or death. Read the
installation, operating and maintenance
instructions thoroughly before installing or
servicing the equipment.
A five minute complete shutoff must be
observed before the appliance is relighted.
Intended for other than household use.
Plug the appliance into a properly
grounded electrical outlet of the correct
voltage, size and plug configuration. If they
do not match, contact a qualified electrician
to determine the proper voltage and size and
install the proper electrical outlet.
Do not connect to a circuit operating
more than 150V to ground.
To avoid any personal injury or damage to
the unit do not pull the appliance by the power
cord.
To prevent any injury, discontinue any use
if power cord is frayed or worn.
To prevent any injury or damage this
commercial appliance must be installed by a
qualified electrician.
To avoid any injury, turn the power off,
unplug from the power source and allow to
cool before performing any maintenance.
To avoid electrical shock or personal
injury, do not steam clean or use excessive
water on this commercial appliance.
MP5017-2002
This product has no "user" serviceable
parts. To avoid injury or damage to the
commercial appliance use only Authorized
AccuTemp Service Agents and Genuine
Replacement Parts when service is required.
Genuine AccuTemp Replacement Parts are
specified to operate safely in the environments
in which they are used. Some aftermarket parts
or generic replacements parts do not have
the same specifications to operate safely in
AccuTemp equipment. It is imperative that to
use Genuine AccuTemp Replacement Parts
to avoid injury or damage to the commercial
appliance.
Always disconnect from power source
before cleaning or servicing.
Any in-the-field modification that bypass
the built-in safety features will result in personal
injury or death.
This appliance must be properly
grounded, in accordance with all National,
State or local electrical codes.
This appliance has a totally unique design
and is constructed unlike any other griddle
on the market today. Any modification may
permanently damage the appliance.
This appliance must be level for proper
operation and to reduce possible damage to
this commercial appliance.
This appliance is heavy, for safe handling,
the installer should obtain help as needed
or employ appropriate material handling
equipment to remove the commercial
appliance from the skid and move to the final
location in the building.
Accu-Steam Gas Griddle
5