Integrate the meter with the control system
Table 6-2:
Options for mA Output Process Variable
Process variable
API referral
Referred Density (API)
Concentration measurement
Specific Gravity
Concentration
Referred Density (Concen-
tration)
6.2.2
Configure Lower Range Value (LRV) and Upper Range Value
(URV)
Display
ProLink III
Field Communicator Configure > Manual Setup > Inputs/Outputs > mA Output 1 > mA Output Settings > PV LRV
Overview
The Lower Range Value (LRV) and Upper Range Value (URV) are used to scale the mA output,
that is, to define the relationship between mA Output Process Variable and the mA output
level.
Important
Your device may have been ordered with predefined values for LRV and URV that are appropriate for
specific applications. However, you can change these settings if you want to.
88
(continued)
Display
RDENS
SG
CONC
RDENS
OFF-LINE MAINT > OFF-LINE CONFG > IO > CONFIG MAO 1 > 4 mA
OFF-LINE MAINT > OFF-LINE CONFG > IO > CONFIG MAO 1 > 20 mA
OFF-LINE MAINT > OFF-LINE CONFG > IO > CH B > MAO 2 > CONFIG MAO 2 > 4 mA
OFF-LINE MAINT > OFF-LINE CONFG > IO > CH B > MAO 2 > CONFIG MAO 2 > 20 mA
Device Tools > Configuration > I/O > Outputs > mA Output > mA Output 1 > Lower Range Value
Device Tools > Configuration > I/O > Outputs > mA Output > mA Output 1 > Upper Range Vaue
Device Tools > Configuration > I/O > Outputs > mA Output > mA Output 2 > Lower Range Value
Device Tools > Configuration > I/O > Outputs > mA Output > mA Output 2 > Upper Range Vaue
Configure > Manual Setup > Inputs/Outputs > mA Output 1 > mA Output Settings > PV URV
Configure > Manual Setup > Inputs/Outputs > mA Output 2 > mA Output Settings > SV LRV
Configure > Manual Setup > Inputs/Outputs > mA Output 2 > mA Output Settings > SV URV
Label
ProLink III
Referred Density (API)
Specific Gravity
Concentration
Referred Density (Concen-
tration)
Micro Motion
®
Compact Density Meters (CDM)
Field Communicator
Density at Reference (API)
Specific Gravity (CM)
Concentration (CM)
Density at Reference (CM)