Table of Contents
Advertisement
root@# set routing-options static route default next-hop address
8. Configure the IP address and prefix length for the router management interface.
[edit]
root@# set interfaces em0 unit 0 family inet address address/prefix-length
CAUTION:
the same subnet, only one interface is usable and supported.
NOTE:
The management ports, em0 (MGMT for RJ-45 connections) and em1 (also labeled MGMT for fiber
connections) are found on each of the control boards of the MX10016.
9. (Optional) Configure the static routes to remote prefixes with access to the management port.
[edit]
root@# set routing-options static route remote-prefix next-hop destination-ip retain no-readvertise
10. Enable Telnet service.
[edit]
root@# set system services telnet
NOTE:
When Telnet is enabled, you cannot log in to an MX10016 through Telnet using root credentials. Root
login is allowed only for SSH access.
11. Commit the configuration to activate it on the router.
[edit]
root@# commit
Safety Warnings Summary
This is a summary of safety warnings. For a complete list of warnings, including translations, see
Routing Platform Hardware Guide
Although the CLI permits you to configure two management Ethernet interfaces within
at https://www.juniper.net/documentation/.
30
theMX10016 Universal
Advertisement
Table of Contents
