Safety Warnings Summary - Juniper ACX6160 Quick Start Manual

NOTE: See the ACX6160 Universal Metro Router Feature Guide at
information about the ACX6160 features.

Safety Warnings Summary

This is a summary of safety warnings. For a complete list of warnings, including translations, see the ACX6160 Universal
Metro Router Hardware Guide at https://www.juniper.net/documentation/.
WARNING:
WARNING:
intrabuilding or unexposed wiring or cabling only. The intrabuilding ports of the equipment or subassembly
MUST NOT be metallically connected to interfaces that connect to the Outside Plant (OSP) or its wiring.
These interfaces are designed for use as intrabuilding interfaces only (Type 2 or Type 4 ports as described
in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. The addition of primary
protectors is not sufficient protection in order to connect these interfaces metallically to OSP wiring.
WARNING:
power connections are fully disconnected so that power to the device is completely removed.
CAUTION:
the other end of the strap around your bare wrist. Failure to use an ESD strap could result in damage to
the equipment.
Permit only trained and qualified personnel to install or replace ACX6160 components.
For the cooling system to function properly, the airflow around the chassis must be unrestricted.
Before connecting the device to a power source, read the installation instructions in the ACX6160 documentation.
Perform only the procedures described in this Quick Start Guide and the ACX6160 documentation. Other services must
be performed only by authorized service personnel.
Before installing the device, read the planning instructions in the in the ACX6160 Universal Metro Router Hardware Guide
to make sure that the site meets power, environmental, and clearance requirements for the ACX6160.
Failure to observe these safety warnings can result in personal injury or death.
The intrabuilding ports of the equipment or subassembly are suitable for connection to
For a device that has more than one power supply connection, you must ensure that all
Before removing or installing the ACX6160, attach an ESD strap to an ESD point, and place
https://www.juniper.net/documentation/
12
for