Sequence Of An Automatic Cooking Process; Changing Settings During A Cooking Process; Cancelling Cooking - Miele DGC 6300 Operating And Installation Instructions

Operation: Combi mode
Sequence of an automatic cooking
process
Up until the start time the function, the
selected temperature and moisture
level, Start at and the start time will
appear in the display.
After the start time you can see the
temperature increasing in the display
during the heating-up phase until the
set temperature is reached. Once this
temperature is reached, a buzzer will
sound if this option has been switched
on (see "Settings - Acoustic
information").
After the heating-up phase you can
follow the time counting down in the
display (time remaining). The last minute
counts down in seconds.
At the end of the cooking process the
steam generator and oven heating will
switch off. A buzzer or a melody will
sound (see "Settings - Acoustic
information").
Steam reduction (only with temperatures
of approx. 80 - 100 °C and 100%
moisture) and Process finished
appear in the display.
You have the option of saving the
programme as a User programme (see
"User programmes") or increasing the
duration of the programme via .
42
Changing settings during a cooking
process
 Touch .
The following will appear in the display:
– all individual cooking stages
– Add cooking stage
You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.
 Scroll through the list until the
cooking stage you want or
cooking stage
display.
 Confirm with OK.
 Alter the cooking stages as you wish
(see "Basic operation") and confirm
with OK.
A summary of your settings will appear
in the display.
 Check the settings and confirm with
OK.

Cancelling cooking

will
 Turn the function selector to •.
Select function
Any cooking durations set are deleted.
Add
is highlighted in the
will appear in the display.