Sequence Of An Automatic Cooking Process; Changing Settings During A Cooking Process - Miele TX3587 Operating And Installation Instructions

Operation
Sequence of an automatic cooking
process
Up until the start time the function, the
selected temperature,
start time will appear in the display.
After the start time you can see the
temperature increasing in the display
during the heating-up phase until the
set temperature is reached. Once this
temperature is reached a tone will
sound.
After the heating-up phase, you can
follow the time counting down in the
display. The last minute counts down in
seconds.
If you are cooking at a temperature of
approx. 80 °C or more,
will appear in the display shortly before
the end of the cooking time and the
door will automatically open a little.
At the end of the cooking process the
steam generator will switch off. A
buzzer or melody will sound (see
"Settings - Acoustic information").
Process finished will appear in the
display.
You have the option of saving the
programme as a User programme (see
"User programmes") or increasing the
duration of the programme via .
32
Start at and the
Steam reduction
Changing settings during a cooking
process
 Touch 
The following will appear in the display:
– Temperature
– Duration
– Finish at
– Start at
If the temperature in the oven
compartment is too high
Start at are not displayed.
Changing the temperature
 Scroll through the list until
Temperature is highlighted.
 Confirm with OK.
 Change the temperature.
 Confirm with OK.
The programme will restart with the new
temperature.
You can also permanently reset the
recommended temperature to suit
your personal cooking practices (See
"Settings - Recommended
temperatures").
Finish at and