Miele DGC 6300 Operating And Installation Instructions page 10

Warning and Safety instructions
Technical safety

Repairs and other work by unqualified persons could be
dangerous. Installation, maintenance work and repairs to electrical
appliances must only be carried out by a Miele approved service
technician.

A damaged appliance is dangerous. Check the appliance for any
visible damage. Never install or attempt to use a damaged
appliance.

Reliable and safe operation of this oven can only be assured if it
has been connected to the mains electricity supply.

The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.

Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency)
matches the mains electricity supply. This data must correspond in
order to avoid the risk of damage to the appliance. Consult a
qualified electrician if in any doubt.

Do not connect the appliance to the mains electricity supply by a
multi-socket adapter or an extension lead. These do not guarantee
the required safety of the appliance (e.g. danger of overheating).

For safety reasons, this appliance may only be used after it has
been built in.

This appliance must not be installed and operated in mobile
installations (e.g. on a ship).

Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults. Do not open the outer casing of the appliance.
10