Display
The display is used for showing the time of day or information about functions,
temperatures, cooking durations, Automatic programmes, User programmes and
settings.
Information or a list of options will appear in the display depending on the function
selected and/or by touching the sensor.
After switching the steam oven on with the On/Off sensor, you will be prompted
to
Select function
.
If you have not selected a function, the list of options will appear in the display
when you touch the sensor.
After selecting a function (except for
that function will appear in the display when you touch the sensor.
To select an option, scroll through the list with the rotary selector until the
option you want is highlighted.
Then confirm the selection with OK.
Symbols
The following symbols may appear in the display:
Symbol
Meaning
If two or three options are available, arrows will appear on the
right-hand side of the display. Use these to scroll through the list.
Available options are highlighted in white one after the other.
If more than three options are available, a bar will appear on the
right-hand side of the display. Use this to scroll through the list.
The end of a list is indicated by a dotted line. By scrolling down
further, you reach the beginning of the list again.
A tick indicates the option which is currently selected.
This symbol indicates that there is additional information and
advice about using the oven. Select OK to access the
information.
Minute minder
Some settings, e.g. display brightness and buzzer volume, are
selected using a bar chart.
Automatic programmes
Controls
), a list of options for
23