Miele DGC 6300 Operating And Installation Instructions page 127

A message will appear in the display:
 Fill the water container with 1 litre of
fresh tap water and drop two Miele
descaling tablets in it.
 Push the water container into the
appliance until it connects.
 Confirm with OK.
The descaling process will now begin,
and the time remaining will count down
in the display.
It is only possible to cancel the
descaling process during the first
6 minutes. Do not switch the
appliance off during the descaling
process. If it is switched off before the
end of the process, the whole process
will have to be started from the
beginning again.
During the course of the descaling
process, the water container needs to
be rinsed and filled with fresh water.
Follow the instructions in the display:
 Remove the water container and take
the insert out.
 Empty the water container.
 Rinse the water container and the
insert thoroughly.
 Fill the water container with 1 litre of
fresh tap water and fit the insert in the
container.
 Push the water container into the
appliance until it connects.
 Confirm with OK.
Once the estimated time has elapsed,
Process finished will appear in the
display.
Cleaning and care
After descaling
 Switch the steam oven off.
 Remove, empty and dry the water
container.
 Dry the oven compartment.
 Leave the appliance door open until
the oven interior is completely dry.
127