Table of Contents
Advertisement
6. Use the "Diagnostic Tool" or your labelling software to select and calibrate the appropriate media
sensor for your label type.
(If you use the "Diagnostic tool" click as follows: Select the "Printer Configuration" tab then click the
"Calibrate Sensor" button ).
Always be prepared to recalibrate the gap/black mark sensor after changing the media (label stock)
Loading path for roll labels
3.4.2 External Label Roll Mount Installation (Optional)
1. Attach an external paper roll mount on the bottom of the printer.
2. Insert a 3" label spindle into a paper roll. And install it
on the external paper roll mount.
3. Open the printer's top cover and separate the media (label) holders to fit the media width.
15
Advertisement
Table of Contents
