Table of Contents
Advertisement
3. Hold the top cover and press the top cover support to disengage the top cover support with lower
inner cover. Gently close the top cover.
3.3 Loading the Ribbon
1. Open the printer's top cover by pulling the top cover open levers located on each side of the printer
and lifting the top cover to the maximum open angle.
2. Open the ribbon access cover.
Note:
1. With peeler/cutter fitted, the top cover must be opened before the ribbon access cover can
be opened.
3. Insert the ribbon right side onto the supply hub. Align the notches on the left side and mount onto
the spokes.
10
Advertisement
Table of Contents
