Setup; Setting Up The Printer - LabelStation CN User Manual

2.2.3 Rear View
7
2
6
1
4 5
3
1. Ethernet RJ-45 interface
2. USB interface
3. Centronics parallel interface
4. RS-232C interface
5. Power jack socket
6. Power switch
7. Fan-fold paper entrance chute

3. Setup

3.1 Setting Up the Printer

1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the USB cable provided.
4. Connect the AC power cord from the adaptor to a power socket, then plug the low voltage
cord into printer. See diagram.
8