Table of Contents
Advertisement
3. Move the media guides to fit the label width by turning the guide adjuster knob.
4. Disengage the top cover support and close the top cover gently.
5. Use the "Diagnostic Tool" or your labelling software to select and calibrate the appropriate media
sensor for your label type.
(If you use the "Diagnostic tool" click as follows: Select the "Printer Configuration" tab then click the
"Calibrate Sensor" button ).
Always be prepared to recalibrate the gap/black mark sensor after changing the media (label stock)
3.5 Diagnostic Tool
The Diagnostic Utility is a toolbox that allows users to explore the printer's settings and
status; change printer settings; download graphics, fonts, and firmware; create printer
bitmap fonts; and to send additional commands to the printer. Using this convenient
tool, you can explore the printer status and settings and troubleshoot the printer.
Note: This utility works with printer firmware version V6.00 and later.
3.5.1 Start the Diagnostic Tool
1. Double click on the Diagnostic tool icon
to start the software.
2. There are four features (Printer Configuration, File Manager, Bitmap Font Manager, Command
Tool) included in the Diagnostic utility.
19
Advertisement
Table of Contents
