Table of Contents
Advertisement
SEA FURY.
Wing.
Aileron.
Repeat the procedure for the other wing
half.
ENGINE MOUNT INSTALLATION.
See pictures below.Make yourself the
template of your engine on paper.
4x30mm.
Mark and drill 4 holes for engine mount.
Insert 4 blind nuts to firewall.
Diameter =5.2mm.
M2 lock nut.
Instruction Manual.
INSTALLING THE STOPPER ASSEMBLY.
1) Using a modeling knife, carefully cut off
the rear portion of one of the 3 nylon tubes
leaving 1/2" protruding from the rear of the
stopper. This will be the fuel pick up tube.
2) Using a modeling knife, cut one length of
silicon fuel line. Connect one end of the line to
the weighted fuel pick up and the other end to
the nylon pick up tube.
3) Carefully bend the second nylon tube up
at a 45º angle. This tube is the vent tube.
Thread locker glue.
13
Advertisement
Table of Contents
