Deleting Data - Merck RQflex 10 Instruction Manual

|
2 4

Deleting data

When?
1 . To delete the last result.
2 . In the case of an incorrect measurement.
3 . To delete all measurement results.
How?
When the reference code is displayed, press the MEM button for three
seconds. This deletes the most recent stored result. During this procedure,
the result to be deleted blinks in the display and a beeper sounds.
Deletion is complete when the display shows 000. Press the TEST button.
The reference code appears again.
10:23 12.07
M E M S TA R T
123
MEM
T E S T O N / O F F
10:23 12.07
M E M S TA R T
000
M E M
T E S T O N / O F F
Important
All stored data for a method are deleted when the instrument is coded
with a new bar-code strip!