Troubleshooting Table; Operating Problems - Hanseatic 697144 User Manual

Page EN-30

Troubleshooting table

Troubleshooting table
Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improper repair!
Conducting improper repairs to the dishwasher puts the person carrying out the re-
pairs and the user in danger.
Only authorised specialists may re-
■
pair the dishwasher. If in doubt,
contact our service team (see page
EN-33).
Only carry out the actions which are
■
described in this user manual.
Never repair defective dishwashers –
■
or dishwashers which you presume to
be defective – yourself. You can en-
danger yourself and subsequent us-
ers.

Operating problems

Problem Possible cause
The dishwasher The mains plug has not
cannot be switched been inserted into a socket.
on.
There is no voltage being
supplied through the sock-
et.
The selected dish- The dishwasher's door is
washer programme not closed properly.
will not start or it
The water tap is not proper-
stops.
ly on.
The inlet hose is defective.
There is a risk of overflow-
ing. The electrical water
stop system has been acti-
vated.
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
If water overfl ows, switch off the
■
water supply immediately and then
contact the service team (see page
EN-33).
If the water has overfl owed, remove
■
any water standing in the dishwasher
before restarting a programme.
Solution
Connect the mains plug to the socket.
Check the fuse. Check the socket by con-
necting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service team (see page EN-33).