The Dishwashing Results Are Not Satisfactory - Hanseatic 697144 User Manual

Page EN-32 Troubleshooting table

The dishwashing results are not satisfactory

Problem Possible cause
There are residues The rinse aid is incorrectly
or streaks on the dosed.
dishes.
There is no dishwasher salt. Add dishwasher salt see „Adding dish-
The dishwasher salt is
clumpy.
The dishes are not There are food scraps
completely clean. which are encrusted onto
the dishes.
The dishes have not been
stacked optimally.
You have selected the
incorrect dishwashing pro-
gramme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too
low.
The spraying arm can not
rotate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Only one wash arm is ac-
tive.
Solution
Adjust the dosage (see „Adding rinse aid"
on page EN-12).
washer salt" on page EN-13).
Stir the dishwasher salt using the end of a
spoon or similar.
Soak dirty dishes prior to washing the dish-
es.
Stack the dishes in such a way that all
parts can be reached by the water jets see
„Loading the dishwasher" on page EN-14).
Select the correct dishwashing programme
see „Dishwasher programme table" on
page EN-17).
Also select the "Intensive washing" option
(see page EN-19).
Use the correct dosage of dishwasher de-
tergent see „Dishwasher programme table"
on page EN-17).
Turn the water tap on completely.
Ensure that no dishes are impeding the
motion of the spraying arm.
Clean the nozzles see „Cleaning the wash
arms" on page EN-22).
See „Cleaning the wash arms" on page
EN-22).