Adding Rinse Aid - Hanseatic 697144 User Manual

Page EN-12 Dishwasher detergents, rinse aids and dishwasher salts
2. Pour the dishwasher detergent into the
detergent dispenser (22).
3. Push the cover of the compartment
closed so that the closure clicks into place
once again.

Adding rinse aid

NOTICE
Risk of damage!
Using an excessive amount of rinse aid
can lead to increased foaming and can
compromise the rinsing results.
Wipe away rinse aid which has over-
■
fl owed immediately.
Take note of the markings for the
■
maximum fi ll quantities ("max") in
the rinse aid chamber.
Using unsuitable substances can cause
damage to the dishwasher.
Only put rinse aids which are suita-
■
ble for dishwashers into the rinse aid
chamber.
Add rinse aid before using for the first
time and when the "Add rinse aid" dis-
play (14) is illuminated.
As rinse aid is automatically dispensed during
operation, it ensures that the dishes are spot-
free and accelerates the drying process.
(22)
(21)
1. Turn the cover of the rinse aid dispenser
(21) a quarter of a turn anticlockwise and
remove it.
2. Fill the water tank to the "max" mark in the
opening. The adjacent inspection window
turns black.
3. Wipe away any rinse aid which has spilt
immediately so that you don't compro-
mise the rinsing results and to avoid in-
creased foaming.
4. We recommend that you do not change
the dosing amount set in the factory at
first. Only correct the dosage if you are
not satisfied with the rinsing results (see
below).
5. Place the dispenser cover back over the
opening and rotate it clockwise to close it.
Changing the rinse aid dosage
If, after washing, the dishes are
– dull and stained, increase the dosage by
turning the arrow in the rinse aid dispenser
(21) to a higher value.
– sticky and smeared, decrease the dosage
by turning the arrow in the rinse aid dis-
penser (21) to a lower value.
(14) (13)