Pa-7050 Front Panel (Dc); Pa-7050 Back Panel (Dc) - PaloAlto Networks PA-7000 Series Hardware Reference Manual

Item Component
3 Power Entry Module (PEM)
AC power switches

PA-7050 Front Panel (DC)

The following image shows the front panel of the PA-7050 firewall (with DC power supplies installed).
The only difference between the front panel of the AC model and the front panel of the DC
model is that the DC model has four front DC power supplies instead of four AC power
supplies. For descriptions of the front panel components, see
for information on connecting DC power, see

PA-7050 Back Panel (DC)

The following image shows the back panel of the PA-7050 firewall (with DC power supplies installed). The
AC inlets and switches are not functional and must remain covered using the provided cover plate.
PA-7000 SERIES FIREWALL HARDWARE REFERENCE | PA-7000 Series Firewall Overview
Description
Provides switches to power on or off the AC power supplies.
Each switch has a circuit breaker that will trip if the load reaches
25-amps.
Connect Power to a PA-7000 Series
PA-7050 Front Panel (AC)
Firewall.
2019 Palo Alto Networks, Inc.
©
and
19